HERMIGA Production
Comparison Table
View the comparison table below on the HERMIGA 120 atomiser range to understand which system would best suit your application. If you need more information, then speak to an expert today.
- 25-1000kg Crucible Sizes
- High Efficiency Cyclone & HEPA Filters
- Stainless Steel Atomisation Chambers
| Model No. | 120/25 CC | 120/50 V3i | 120/100 V3i | 120/250V3i | 120/500 V3i | 120/1000 V4i |
|---|---|---|---|---|---|---|
| Melt Capacity (Steel Equivalent) kg | 50 | 50 | 100 | 250 | 500 | 1000 |
| Titanium Capability | Yes | No | No | No | No | No |
| Atomisation Rate kg/min | 3-6 | 10-15 | 10-15 | 10-20 | 10-20 | 10-20 |
| Typical Median Range (d50) µm | 75 | 25-100 | 25-100 | 25-100 | 30-100 | 30-100 |
| Melt Chamber Type | Cold Crucible Bottom-Pouring | Induction Heated Tilt & Pour Furnace | Induction Heated Tilt & Pour Furnace | Induction Heated Tilt & Pour Furnace | Induction Heated Tilt & Pour Furnace | Dual Induction Heated Tilt & Pour Furnace |
| Guide Tube Heating Type | Induction Heating | Induction Heating | Induction Heating | Induction Heating | Induction Heating | Induction Heating |
| Atomisation Chamber | Water Cooled Stainless Steel | Water Cooled Stainless Steel | Water Cooled Stainless Steel | Water Cooled Stainless Steel | Water Cooled Stainless Steel | Water Cooled Stainless Steel |
| Powder Handling | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter |