HERMIGA Mini
Comparison Table
View the comparison table below on the HERMIGA 75 atomiser range to understand which system would best suit your application. If you need more information, then get in touch.
- 2-5kg Crucible Sizes
- High Efficiency Cyclone & HEPA Filters
- Stainless Steel Atomisation Chambers
| Model No. | 75/3 Vi | 75/3 Arc | 75/5 Vi | 75/5 Vi EAC | 75/2 CC |
|---|---|---|---|---|---|
| Melt Capacity (Steel Equivalent) kg | 3 | Wire Feed | 5 | 5 | 2 (Titanium) |
| Titanium Capability | No | No | No | No | Yes |
| Atomisation Rate kg/min | 2 | 0.1 | 2 | 2 | 2 |
| Typical Median Range (d50) µm | 15-70 | 50-100 | 15-70 | 15-80 | 75 |
| Melt Chamber Type | Bottom Pouring Induction Heating | Wire Feed, Arc Melting, Spray Atomisation | Bottom Pouring Induction Heating | Bottom Pouring Induction Heating | Cold Crucible Bottom Pouring Induction |
| Guide Tube Heating Type | Resistance Heating | N/A | Resistance Heating | Resistance Heating | Resistance Heating |
| Atomisation Chamber | Stainless Steel | Stainless Steel | Stainless Steel | Extended Atomisation Chamber Stainless Steel | Stainless Steel |
| Powder Handling | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter | High Efficiency Cyclone & HEPA Filter |